The concept

switches the ignition on or off and Pressing the Start/Stop button switches the ignition on or off and starts the engine.

Automatic transmission: the engine starts if the brake is depressed when the Start/Stop button is pressed.

Manual transmission: the engine starts if the clutch is depressed when the Start/Stop button is pressed.

    See also:

    Functional requirements
    The system must have been reset when the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to ensure that the ...

    Label
    Run-flat tires RSC label on the tire sidewall. The wheels are composed of special rims and tires that are self-supporting, to a limited degree. The support of the sidewall allows the tire to re ...

    Supplementary text messages
    Addition information, such as on the cause of a fault or the required action, can be called up via Check Control. The supplementary text of urgent messages is displayed on the Control Display a ...