Damage to safety belts

In the case of strain caused by accidents or damage:

Have the safety belts, including the safety belt tensioners, replaced and have the belt anchors checked.

Have the work performed only by your Checking and replacing safety belts
Have the work performed only by your service center; otherwise, it cannot be ensured that this safety feature will function properly.◀

    See also:

    Pinch protection system
    If the closing force when closing the glass sunroof exceeds a certain value, the closing movement is stopped, beginning at approximately the middle of the opening in the roof, or from the tilt ...

    Fuel specifications
    Never use fuels labeled at the fuel pump as metal-containing. Do not use leaded gasoline or gasoline with metal-containing additives such as manganese or iron; doing so can cause permanent damag ...

    Towing methods when towing other vehicles
    Tow bar The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: ▷ C ...