Saving a function

1. Highlight the function via the iDrive.

2. the desired button for more Press the desired button for more than 2 seconds.

    See also:

    Unbuckling the belt
    1. Hold the belt firmly. 2. Press the red button in the belt buckle. 3. Guide the belt back into its reel. ...

    Automatic deactivation
    In certain situations, the Automatic Engine Start/ Stop Function is deactivated automatically for safety reasons, such as when the driver is detected to be absent Malfunction The automatic eng ...

    Message when the system was not reset
    A Check Control message is displayed. The system detected a wheel change but was not reset. Warnings regarding the current tire inflation pressure are not reliable. Check the tire inflation pre ...