Tow fitting

Tow fitting
Tow fitting

The screw-in tow fitting should always be carried in the vehicle. It can be screwed in at the front or rear of the BMW. It is in the onboard vehicle tool kit located in a storage compartment on the right side in the cargo area. Open the cover.

▷ Use only the tow fitting provided with Tow fitting, information on use

▷ Use only the tow fitting provided with the vehicle and screw it all the way in.

▷ Use the tow fitting for towing on paved roads only.

▷ Avoid lateral loading of the tow fitting, e.g., do not lift the vehicle by the tow fitting.

Otherwise, damage to the tow fitting and the vehicle can occur.

    See also:

    Switching on
    The cooler can be operated at two levels. 1. Switch on the ignition. 2. Press the button once for each cooling level. The highest cooling power is active when two LEDs are lit. If the coole ...

    General information
    Whether or not text messages and e-mails from the mobile phone are displayed depends on whether transmission from the mobile phone to the vehicle is supported. Text messages and emails may not ...

    2010 BMW X6 Review
    Crow tastes better with the right seasoning. After writing a less-than-favorable review of the 2010 BMW 5 Series GT, I had visions of putting Mangus Hirschfield behind the wheel of the 2010 X6 M. B ...