Starting aid terminals
Connecting order
Connect the jumper cables in the correct order; otherwise, there is the danger of injury from sparking.

The so-called starting aid terminal in the engine compartment acts as the battery's positive terminal.
Open the cover of the starting aid terminal.

The body ground or a special nut acts as the negative terminal.
See also:
Malfunction
The cooler cannot be switched on or switches
off, e.g., when the cooling system overheats or
if the battery voltage is low. One of the LEDs
flashes.
Remedy the problem
1. If necessary, allow t ...
Preselecting the switch-on time
1. "Settings"
2. "Climate"
3. "Timer 1:" or "Timer 2:"
4. Set the desired time. ...
Destination entry by map
Selecting the destination
1. "Navigation"
2. "Map"
The current position of the vehicle is indicated
on the map.
3. "Interactive map"
4. Select the destination w ...
