Oil types for refilling

Notes

Oil additives may lead to engine damage. No oil additives

Oil additives may lead to engine damage.

When selecting an engine oil, ensure that Viscosity grades for engine oils

When selecting an engine oil, ensure that the engine oil belongs to one of the viscosity grades SAE 0W-40, SAE 0W-30, SAE 5W-40, and SAE 5W-30 or malfunctions or engine damage may occur.

The engine oil quality is critical for the life of the engine.

Some types of oils in some cases are not available in all countries.

Approved oil types

Additional information about the approved

Additional information about the approved types of oils can be requested from the service center.

Alternative oil types

If the approved engine oils are not available, up to 1 US quart/liter of an oil with the following specification can be added:

Oil change

    See also:

    Functional requirements
    ▷ There are no external sources of interference nearby. ▷ To lock the vehicle, the remote control must be located outside of the vehicle. ▷ The next unlocking and locking cycle ...

    Requirements
    Via the Control Display, set a language that is also supported by the voice activation system so that the spoken commands can be identified. Set the language. ...

    Fold-out position of the wipers
    Fold-out position of the wipers Required when changing the wiper blades or under frosty conditions, for example. 1. Switch off the ignition. 2. Under frosty conditions, ensure that the wiper bl ...