Requirements
▷ The installed BMW Assist system is logged in to a wireless communications network.
This network must be capable of transmitting the services.
▷ To transmit position data, the vehicle must be able to determine the current position.
▷ To activate and update BMW Assist, a GPS signal must be available.
▷ The BMW Assist service contract was signed with your service center or with the BMW Assist Response Center. Enabling must have been completed.
▷ BMW Assist is activated.
See also:
Assistance functions
Functional requirement
▷ The backup camera is switched on.
▷ The trunk lid is fully closed.
Pathway lines
Pathway lines
▷ Can be shown in the backup camera image
when in tra ...
Switching off the engine
Procedure
1. Engage transmission position P with the vehicle
stopped.
2. Press the Start/Stop button.
3. Set the parking brake.
4. Remove the remote control from the ignition
lock
Before driv ...
Capturing the image
The image is captured by two cameras
integrated in the exterior mirrors and by the
backup camera.
The range equals:
▷ Approx. 7 ft/2 m to the side.
▷ approx. 7 ft/2 m to the rear.
...