Updating the navigation data
General information
Navigation data are stored in the vehicle and can be updated.
Current navigation data and the authorization code are available from your service center.
▷ Depending on the data volume, a data update may take several hours.
▷ Update during the trip to preserve battery.
▷ During the update, only the basic functions of the navigation system are available.
▷ The status of the update can be viewed.
▷ The system restarts after the update.
▷ Remove the data carrier with the navigation data after the update.
Performing an update
1. Insert the navigation DVD into the DVD player with the labeled side facing up.
2. Follow the instructions on the Control Display.
3. Enter the navigation DVD authorization code.
4. Change the DVD, if necessary.
After interrupting your trip, follow the instructions on the Control Display.
Viewing the status
1. 
Press the button.
2. "Navigation update"
See also:
Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the L ...
Ignition on
Automatic transmission: press the Start/Stop
button, and do not press on the brake pedal at
the same time.
Manual-shift transmission: press the Start/Stop
button, and do not press on the clutch ...
Odometer and trip odometer
▷ Odometer, arrow 1.
▷ Trip odometer, arrow 2.
Display/reset miles
Press the knob.
▷ When the ignition is switched
off, the time, external temperature
and odometer are disp ...