Setting the language

Press and hold the control button for approx. 12 to 13 seconds. Briefly press the control button again to switch between English "E" and German "O".

The setting is stored automatically after approximately 10 seconds.

    See also:

    Functional requirements
    The system must have been reset when the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to ensure that the ...

    Coolant level
    Checking 1. Let the engine cool. 2. The coolant level is correct if it lies between the minimum and maximum marks. The marks are on the side of the coolant reservoir. Adding engine oil 1. Let ...

    The concept
    The system is functional at speeds beginning at approx. 20 mph/30 km/h. The speed specified using the lever on the steering column is maintained. The system brakes on downhill gradients if engin ...