Switching on/off

Switching on/off
Press the button.
See also:
Functional requirements
The system must have been reset when the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured. Always use
wheels with TPM electronics to ensure that the
...
Functional requirement
▷ To lock the vehicle, the remote control must
be located outside of the vehicle..
▷ The next unlocking and locking cycle is not
possible until after approx. 2 seconds..
▷ The e ...
Measurement
Measurements are made by ultrasound sensors
in the bumpers.
The range is approx. 6 ft/2 m.
An acoustic warning is first given:
▷ By the front sensors and two rear corner
sensors at approx ...
