Display on the Control Display
Switching on the backup camera via iDrive
With Top View switched on:
"Rear view camera"
The backup camera image is displayed. The setting is stored for the remote control currently in use.
Brightness
With Top View switched on:
1. 
"Brightness"
2. Turn the controller until the desired setting is reached and press the controller.
Contrast
With Top View switched on:
1. 
"Contrast"
2. Turn the controller until the desired setting is reached and press the controller.
Displaying the turning circle and pathway lines
▷ The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
▷ The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.
The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.
"Parking aid lines"
Turning circle and pathway lines are displayed.
See also:
Front
Seat heating
The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
reached when three LEDs are lit.
To switch of ...
Gas station recommendation
The remaining range is calculated, and if necessary
gas stations along the route are displayed.
1. "Navigation"
2. "Route information"
3. "Recommended refuel"
A lis ...
Emergency detection of remote control
It is possible to switch on the ignition or start the
engine in situations such as the following:
▷ Interference of radio transmission to remote
control by external sources.
▷ Discha ...