Displays in the instrument cluster

Desired speed

▷ The marking lights up in

▷ The marking lights up in green: the system is active.

▷ The marking lights up in orange:

the system has been interrupted.

▷ The marking does not light up: the system is switched off.

Brief status display

Selected desired speed. Selected desired speed.

If --- appears briefly on the display for Check Control messages, it is possible that the system requirements for operation are currently not met.

Distance to vehicle ahead of you

The selected distance to the vehicle driving ahead of you is shown.

Distance display

Distance 1 Distance 1

Distance 2 Distance 2

Distance 3 Distance 3

Distance 4 Distance 4
This value is set after the system is switched on.

The system has been interrupted or The system has been interrupted or distance control is deactivated because the accelerator is being pressed; a vehicle was not detected.

Distance control is deactivated because Distance control is deactivated because the accelerator is being pressed; a vehicle was detected.

Rolling bars: the detected vehicle has driven away.

Indicator/warning lamps

Personal responsibility Personal responsibility

The indicator and warning lamps do not relieve the driver of the responsibility to adapt his or her desired driving speed and style to the traffic conditions.

Depending on how the vehicle is equipped, Depending on how the vehicle is equipped, the indicator lamp in the instrument cluster indicates whether the system is switched on.

The vehicle symbol lights up in orange: The vehicle symbol lights up in orange:

A vehicle has been detected ahead of you.

The vehicle symbol flashes orange: The vehicle symbol flashes orange:

The conditions are not adequate for operating the system.

The system was deactivated but applies the brakes until you actively assume control by pressing on the brake pedal or accelerator.

The vehicle symbol flashes red and an The vehicle symbol flashes red and an acoustic signal sounds:

You are requested to intervene by braking or making an evasive maneuver.

    See also:

    Context help - Owner's Manual to thetemporarily selected function
    The relevant information can be opened directly. Opening during operation via iDrive To move directly from the application on the Control Display to the options menu: 1. Press the button or move ...

    Enabling operation in the rear
    Only possible via the iDrive in the front. 1. "Settings" 2. "Allow rear control" 3. Select the desired priority. ...

    Interior
    The interior has a 2+2 seating configuration with small rear seats, though BMW says those seats get more legroom than the previous generation. Headroom has also increased in the front and rear. Tr ...