Maintaining/storing the speed
Press the button.
or:
Press the rocker switch while the system is interrupted.
When the system is switched on, the current speed is maintained and stored as the desired speed.
It is displayed in the speedometer and briefly displayed in the instrument cluster, Displays in the instrument cluster.
When cruise control is maintained or stored, DSC Dynamic Stability Control is switched on, if necessary.
See also:
Lamps
At a glance
1 Rear fog lamps*
2 Front fog lamps*
3 Automatic headlamp control / adaptive light
control* / high-beam assistant* / welcome
lamps / daytime running lights*
4 Lamps off / daytime ...
After a power failure
Only put the parking brake into operation
after a power failure
The parking brake should only be put into operation
again if it was manually released due to an
interruption in the supply of el ...
Notes
▷ Reception may not be available in some situations,
such as under certain environmental
or topographic conditions. The satellite
radio has no influence on this.
▷ The signal may no ...