Drive-off assistant
This system supports driving away on gradients.
The parking brake is not required.
1. Hold the vehicle in place with the foot brake.
2. Release the foot brake and drive away without delay.
After the foot brake is released, the vehicle is held in place for approx. 2 seconds.
Depending on the vehicle load or when a trailer is being used, the vehicle may roll back slightly.
Driving off without delay
After releasing the foot brake, start driving without delay, since the drive-off assistant will not hold the vehicle in place for more than approx.
2 seconds and the vehicle will begin rolling back.
See also:
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection of a flat tire.
Initialization is started by confirming
the inflation pressures.
Do not ...
At a glance
General infor
► Display the traffic bulletins from radio stations
that broadcast the TI Traffic Information
of a traffic information service. Information
on traffic obstructions and hazards ...
Setting compass zones
Set the compass zone corresponding to the vehicle's
geographic location so that the compass
Setting compass zones
Press the adjustment button for 3‑4 seconds.
The number of the compass zo ...