Status display
The current status of the Flat Tire Monitor can be displayed on the Control Display, e.g., whether or not the FTM is active.
1. "Vehicle Info"
2. "Vehicle status"
3. 
"Flat Tire Monitor"
The status is displayed.
See also:
Jump-starting
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
To prevent pe ...
Functional requirements
The system must have been reset when the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured. Always use
wheels with TPM electronics to ensure that the
...
Engaging the transmission position
► Transmission position P can only be disengaged
if the engine is running and the brake
pedal is pressed.
► With the vehicle stationary, press on the
brake pedal before shifting out of ...