The concept

The system does not measure the actual inflation pressure in the tires.

It detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while moving.

In the event of a pressure loss, the diameter and therefore the rotational speed of the corresponding wheel change. This is detected and reported as a flat tire.

    See also:

    Customer Relations
    At a glance Contact Customer Relations for information on all aspects of your vehicle. ...

    Switching the warning function on/off
    Press the button On: the LED lights up. Off: the LED goes out. The state is stored for the remote control currently in use. ...

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...