Message when the system was not reset
A Check Control message is displayed.
The system detected a wheel change but was not reset.
Warnings regarding the current tire inflation pressure are not reliable.
Check the tire inflation pressure and reset the system.
See also:
Turn signal, high beams,headlamp flasher
Turn signal
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever to the resistance
point.
Unusually rapid flashing of the indicator lamp i ...
Activating
Activating
The High-beam Assistant can be activated
when the low beams are switched on.
1. Turn the light switch to or
.
2. Press the button on the turn signal lever, arrow.
The indicator ...
Priority options
The driver has priority
The source selected via iDrive in the front is
output on the vehicle loudspeakers and can
be selected but not operated from the rear.
Other audio or video sources ...