Status display
The tire and system status is indicated by the color of the tires.
A change in the tire inflation pressure during driving is taken into account.
A correction is only necessary if this is indicated by the TPM
Wheels, green
The tire inflation pressure is equal to the target state.
One wheel is yellow
A flat tire or major drop in inflation pressure in the indicated tire.
All wheels are yellow
▷ A flat tire or major drop in inflation pressure in several tires.
▷ The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.
▷ A flat tire in one or more tires while the system is being reset.
Wheels, gray
The system cannot detect a flat tire. Reasons for this may be:
▷ TPM is being reset.
▷ Disturbance by systems or devices with the same radio frequency.
▷ Malfunction.
See also:
Automatic climate control
1 Air distribution, left
2 Temperature, left
3 AUTO program, left
4 Air volume, AUTO intensity, residual heat,
left
5 Remove ice and condensation
6 Maximum cooling
7 Display
8 Air volume, A ...
Switching the high beams on and offmanually
► High beams on, arrow 1.
► High beams off/headlamp flasher, arrow 2.
The High-beam Assistant can be switched off
when manually adjusting the light. To reactivate
the High-beam Assis ...
Vehicle care
Car care products
BMW recommends using cleaning and care
products from BMW, since these have been
tested and approved.
Car care and cleaning products
Follow the instructions on the container.
...
