Strength of the driver's and front passenger airbag

BMW 3 Series / BMW 3 Series Owners Manual / Controls / Safety / Airbags / Strength of the driver's and front passenger airbag

The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats.

To maintain the accuracy of this function over the long-term, calibrate the front seats when a corresponding message appears on the Control Display.

Calibrating the front seats

A corresponding message appears on the Control Display.

1. Move the respective seat forward all the way.

2. Move the respective seat forward again. It moves forward briefly.

3. Readjust the seat to the desired position.

The calibration procedure is completed when the message on the Control Display disappears.

If the message continues to be displayed, repeat the calibration.

If the message does not disappear after a repeat calibration, have the system checked as soon as possible.

Ensure that the area of movement of the Unobstructed area of movement

Ensure that the area of movement of the seats is unobstructed to avoid personal injury or damage to objects.

    See also:

    For better control
    The indicator lamp flashes: DSC controls the drive forces and brake forces. The indicator lamp lights up: DSC and DTC has failed. DSC deactivated: The indicator lamp lights up and DSC O ...

    Adjusting the height
    Adjusting the height ▷ To raise: pull. ▷ To lower: press the button, arrow 1, and push the head restraint down. The center head restraint cannot be adjusted in elevation. ...

    Safety belt reminder for the driver's and front passenger seat
    The indicator lamp flashes or lights up and a signal sounds. Make sure that the safety belts are positioned correctly. The safety belt reminder is active at speeds above approx. 5 mph/8 km/h ...