Daytime running lights
With the ignition switched on, the daytime running
lights light up in position 0, 
or
.
After the ignition is switched off, the parking
lamps light up in position 
.
Activating/deactivating
1. "Settings"
2. "Lighting"
3. "Daytime running lamps"
The setting is stored for the remote control currently in use.
See also:
Selecting the contact as a navigation
destination
1. Select the desired contact.
2. Select the address.
3. "Start guidance" or "Add as another
destination" ...
Checking the coolant level
1. Do not open the hood until the engine has
cooled down.
2. Turn the expansion tank cap counterclockwise
slightly to allow any accumulated pressure
to escape; then continue turning to
open.
...
Instrument lighting
You can adjust the brightness of the instrument lighting only when the parking
lamps or the low beams are switched on.
1. Push button 1in the turn signal/high beam lever up or down repeated ...