Trip computer
There are two types of computer.
▷ "Onboard info": the values can be reset as often as necessary.
▷ "Trip computer": the values provide an overview of the current trip.
Resetting the trip computer
1. "Vehicle Info"
2. "Trip computer"
3. "Reset": all values are reset.
"Automatically reset": all values are reset approx. 4 hours after the vehicle comes to a standstill.
See also:
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
To prevent personal ...
Switching off automatically
The system switches off and the LED goes out:
After approx. 160 ft/50 m when driving forward.
Above approx. 22 mph/36 km/h when driving
forward.
Switch on the system again if necessary. ...
After a power failure
Only put the parking brake into operation
after a power failure
The parking brake should only be put into operation
again if it was manually released due to an
interruption in the supply of el ...