Engaging the transmission position
▷ Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed.
▷ With the vehicle stationary, press on the brake pedal before shifting out of P or N; otherwise, the shift command will not be executed: shift lock.
Depress the brake until you start driving
To prevent the vehicle from creeping after you select a driving position, maintain pressure on the brake pedal until you are ready to start.
Engaging D, R and N
Engaging D, R and N
Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its center position.
Press unlock button, in order to:
▷ Engage R.
▷ Shift out of P.
Engaging P
Engaging P
Press button P.
See also:
Operating the programs
Automatic program change
The system automatically switches to COMFORT
in the following situations:
▷ Failure of DSC Dynamic Damping Control.
▷ The vehicle has a flat tire.
▷ ...
Adjusting electrically
Adjusting electrically
1. Forward/backward
2. Height
3. Seat tilt
Backrest
4. Backrest
Differs depending on seat:
Differs depending on seat
1. Backrest
2. Height
Additional depending o ...
Resetting the system
Reset the system after each correction of the
tire inflation pressure and after every tire or
wheel change.
1. "Vehicle Info"
2. "Vehicle status"
3. "Reset"
4. S ...