Reverse gear

Select only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance needs to be overcome.

    See also:

    Brightness
    Setting the brightness To set the brightness of the Control Display: 1. "Settings" 2. "Control display" 3. "Brightness" 4. Turn the controller until the desired br ...

    Tire identification marks
    Tire size 255/50 R 19 103 Y 255: nominal width in mm 50: aspect ratio in % R: radial tire code 19: rim diameter in inches 103: load rating, not for ZR tires Y: speed rating, before the R on ZR ...

    Drive-off assistant
    This system supports driving away on gradients. The parking brake is not required. 1. Hold the vehicle in place with the foot brake. 2. Release the foot brake and drive away without delay. After ...