Fold-out position of the wipers

Required when changing the wiper blades or under frosty conditions, for example.

1. Switch off the ignition.

2. Under frosty conditions, ensure that the wiper blades are not frozen onto the windshield.

3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 seconds, until the wiper remains in a nearly vertical position.

After the wipers are folded back down, the wiper system must be reactivated.

Fold the wipers back down Fold the wipers back down

Before switching the ignition on, fold the wipers back down to the windshield; otherwise, the wipers may become damaged when they are switched on.

1. Switch on the ignition.

2. Press the wiper levers down. The wipers move to their resting position and are ready for operation.

    See also:

    At a glance
    General information ▷ Display the traffic bulletins from radio stations that broadcast the TI Traffic Information of a traffic information service. Information on traffic obstructions and ...

    New remote controls
    You can obtain new remote controls from your service center. ...

    Brake pedal feel
    When the system brakes and you also depress the brake pedal, a somewhat different braking feel results. ...