Switching the wipers on/off and brief wipe

Do not switch on the wipers if frozen Do not switch on the wipers if frozen

Do not switch on the wipers if they are frozen onto the windshield; otherwise, the wiper blades and the windshield wiper motor may be damaged.

Switching on

Switching on
Switching on

Press the wiper levers up.

The lever automatically returns to its initial position when released.

▷ Normal wiping speed: press up once.

The wipers switch to intermittent operation when the vehicle is stationary.

▷ Fast wiping speed: press up twice or press once beyond the resistance point.

The wipers switch to normal speed when the vehicle is stationary.

Switching off and brief wipe

Switching off and brief wipe
Switching off and brief wipe

Press the wiper levers down.

The lever automatically returns to its initial position when released.

▷ Brief wipe: press down once.

▷ To switch off normal wipe: press down once.

▷ To switch off fast wipe: press down twice.

    See also:

    Issuing a warning
    If the vehicle begins leaving the lane and a lane marking has been detected, the steering wheel begins vibrating. If the turn signal is set before the lane is changed, a warning is not issued. ...

    Clock
    The settings are stored for the remote control currently in use, refer also to Personal Profile on page 28. Setting the timeIn the instrument cluster  To set the 12h/24h format, refer to Se ...

    Vehicle equipment
    All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, ...