Ignition on
button, and do not press on the brake pedal at the same time.
Manual-shift transmission: press the Start/Stop button, and do not press on the clutch pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator and warning lamps in the instrument cluster light up for varying lengths of time.
To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.
The ignition switches off automatically:
▷ When the vehicle is locked, if the low beams are switched on.
▷ Shortly before the battery is discharged completely, so that the engine can still be started.
▷ If the engine is switched off and the ignition is switched on, the system automatically switches to the radio ready state when the door is opened if the lights are switched off or the daytime running lights are switched on.
If the engine is switched off and the ignition is switched on, the system automatically switches to the radio ready state when the door is opened if the lights are switched off.
See also:
Parking lamps/low beams,headlamp control
General information
Switch position: 0, ,
If the driver door is opened with the ignition
switched off, the exterior lighting is automatically
switched off at these switch settings.
Parking lamps
...
Initializing after a power failure
After a power failure during the opening or closing
process, the roof can only be operated to a
limited extent.
Initializing the system
The system can be initialized when the vehicle
is statio ...
Example: setting the clock
Setting the clock
1. Press the button. The main
menu is
displayed.
2. Turn the controller until "Settings" is highlighted,
and then press the controller.
3. If necessary, move the ...