On the front passenger seat

Deactivating airbags

After installing a child restraint fixing system in the front passenger seat, make sure that the front, knee and side airbags on the front passenger side are deactivated.

Deactivate the front passenger airbags automatically.

Deactivating the front passenger airbags Deactivating the front passenger airbags

If a child restraint fixing system is used in the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child restraint fixing system.

Seat position and height

Before installing a child restraint fixing system, move the front passenger seat as far back as possible and adjust its height to the highest position to obtain the best possible position for the belt and to offer optimal protection in the event of an accident.

Do not change the seat position and height after this.

Backrest width

Adjustable backrest width: before installing a child restraint fixing system in the front passenger seat, open the backrest width completely.

Do not change the backrest width again and do not call up a memory position.

Backrest width for the child seat Backrest width for the child seat

Before installing a child restraint fixing system in the front passenger seat, the backrest width must be opened completely. Do not change the adjustment after this; otherwise, the stability of the child seat will be reduced.

    See also:

    Bursts of Power
    The 1M's powertrain is the car's high point, providing ample torque at low engine speeds for a satisfying launch. This twin-turbocharged 3.0-liter inline-six-cylinder produces 335 horsepower at 5, ...

    Adjusting manually
    Forward/backward Forward/backward Pull the lever and slide the seat into the desired position. After releasing the lever, move the seat forward or back slightly to make sure it engages prope ...

    Panic mode
    In dangerous situations, trigger the alarm system: Press the button on the remote control for at least 3 seconds. To switch off the alarm: press any button. ...