Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations:

▷ In automatic car washes.

▷ In duplex garages.

▷ During transport on car-carrying trains, at sea or on a trailer.

▷ When animals are to remain in the vehicle.

Switching off the tilt alarm sensor and interior motion sensor

again Press the remote control button again within 10 seconds as soon as the vehicle is locked.

The indicator lamp lights up for approx. 2 seconds and then continues to flash.

The tilt alarm sensor and interior motion sensor are switched off until the vehicle is locked again.

    See also:

    DVD changer
    In the cargo area The DVD changer is stored behind the left side trim in the cargo area. Controls and displays 1 Empty DVD compartments 2 LED on DVD slot 3 Buttons for DVD compartments 4 DV ...

    Tire tread
    Summer tires Do not drive with a tire tread depth of less than 0.12 in/3 mm. There is an increased danger of hydroplaning if the tread depth is less than 0.12 in/3 mm. Winter tires Do not driv ...

    Notes
    > Reception may not be available in some situations, such as under certain environmental or topographic conditions. The satellite radio cannot influence this. > The signal may not be availabl ...