Programmable memory buttons
General information
The Owner's Manual can be stored on the programmable memory buttons and called up directly.
Storing
1. "Owner's Manual" Select via the iDrive.
2. 
Press the desired button for
more
than 2 seconds.
Executing
Press the button.
The Owner's Manual is displayed immediately.
See also:
Configuring the prewarning
After the warning function is switched on, the
following can be set via the iDrive:
The prewarning can be switched on/off.
The time of the prewarning can be set.
These settings have no effe ...
Bypassing a section of the route
Calculate a new route for a route section.
1. "Navigation"
2. "Route information"
3. "New route for"
4. Turn the controller. Enter the number of
miles within whi ...
Message when the system was not
reset
A Check Control message is displayed.
The system detected a wheel change but was
not reset.
Warnings regarding the current tire inflation
pressure are not reliable.
Check the tire inflation pre ...