Activating the voice activation system

1. Press the button on the steering Press the button on the steering wheel.

2. Wait for the signal.

3. Say the command.

The command is displayed in the instrument cluster.

This symbol in the instrument cluster indicates This symbol in the instrument cluster indicates that the voice activation system is active.

If no other commands are available, operate the function in this case via iDrive.

    See also:

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

    Selecting the distance
    Selecting the distance ▷ Press the rocker down briefly: Increase the distance. ▷ Press the rocker up briefly: Decrease the distance. ▷ Press the rocker down briefly: Increase ...

    Removing the remote control from the ignition lock
    Do not forcibly pull the remote control out of the ignition lock Do not forcibly pull the remote control out of the ignition lock as this may cause damage.◀ Before removing the remote c ...