The concept

▷ Most functions that are displayed on the Control Display can be operated by spoken commands via the voice activation system.

The system prompts you to make your entries.

▷ Functions that can only be used when the vehicle is stationary cannot be operated using the voice activation system.

▷ The system uses a special microphone on the driver's side.

▷ ›...‹ Verbal instructions in the Owner's Manual to use with the voice activation system.

    See also:

    Status display
    The current status of the Tire Pressure Monitor TPM can be displayed on the Control Display, e.g., whether or not the TPM is active. 1. "Vehicle Info" 2. "Vehicle status" 3. ...

    Programming
    Programming 1. Memory buttons 2. LED Fixed-code hand-held transmitters 1. Switch on the ignition, refer to page 61. 2. Initial setup: Press both outer memory buttons 1 for approx. 20 seconds ...

    Tire identification marks
    Tire size 255/50 R 19 103 Y 255: nominal width in mm 50: aspect ratio in % R: radial tire code 19: rim diameter in inches 103: load rating, not for ZR tires Y: speed rating, before the R on ZR ...