See also:

Initialization after a power failure
After a power failure, it is only possible to raise the roof, if necessary. Have the system initialized by your service center. ...

Engaging transmission position
▷ Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed. ▷ With the vehicle stationary, press on the brake pedal before shifting out ...

Programming
LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...