Deleting the button assignments

1. Press buttons 1 and 8 simultaneously for approx. five seconds.

2. "OK"

    See also:

    Functional requirements
    The system must have been initialized when the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after each correction of th ...

    Checking the pressure
    Only check the tire inflation pressure when the tires are cold. This means after driving no more than 1.25 miles/2 km or when the vehicle has been parked for at least 2 hours. When the tires a ...

    Maintaining current speed
    Push, arrow 1, or pull, arrow 2, the lever to the resistance point. The car's current speed is stored and maintained. It is displayed on the speedometer and briefly in the instrument cluster. O ...