Saving a function
1. Highlight the function via the iDrive.
2.
Press the desired button for more
than 2 seconds.
See also:
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts and approximately
the same capacitance in Ah. This information
can be found on the battery.
2. Switch off the engine ...
Snap-in adapter
The snap-in adapter is used to:
▷ Hold the mobile phone.
▷ Recharge the battery.
▷ Connect the mobile phone to an outside antenna
of the vehicle.
This provides for better netwo ...
External temperature
External temperature warning
If the display drops to
+37 ℉/+3 ℃, a signal sounds.
A Check Control message is displayed.
There is the increased danger of
ice.
Ice on roads
Even ...