Notes

When using steam jets or high-pressure Steam jets or high-pressure washers>?

When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃.

Holding them too close or using excessively high pressures or temperatures can cause damage or preliminary damage that may then lead to long-term damage.

Follow the operating instructions for the highpressure washer.◀

washers Cleaning sensors/cameras with highpressure washers When using high-pressure washers, do not spray the exterior sensors and cameras, for Park Distance Control or the backup camera, for instance, for extended periods of time and only from a distance of at least 12 in/30 cm.◀ Wash your vehicle frequently, particularly in winter.

Intense soiling and road salt can damage the vehicle.

    See also:

    Socket for OBD Onboard Diagnosis
    There is an OBD socket on the driver's side for checking the primary components in the vehicle emissions. Emissions The warning lamp lights up: Emissions are deteriorating. Have the vehic ...

    Checking the pressure
    Only check the tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When the tires a ...

    Headphones, vehicle loudspeakers
    Connecting the headphones Normal headphones Connect via the jack 1/8"/3.5 mm, on the rear CD/DVD player. Infrared headphones Connection via the infrared interface on the lower edge of the s ...