Notes
If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles.
To prevent personal injury or damage to both vehicles, adhere strictly to the following procedure.
Do not touch live parts
To avoid the risk of potentially fatal injury,
always avoid all contact with electrical components
while the engine is running.◀
See also:
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
Storage compartments inside the vehicle
Compartments are located next to the steering column, on the doors and
in the center console.
Coupe: clothes hooksThere are clothes hooks in the rear.
Items of clothing hung from the hooks must n ...
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection
of a flat tire. Initialization is started by confirming
the inflation pressures.
Do not ...