Power failure
After a temporary power loss, some equipment needs to be reinitialized.
Individual settings need to be reprogrammed:
▷ Seat and mirror memory: store the positions
again.
▷ Time: update.
▷ Date: update
▷ Radio station: save again
▷ Navigation system: wait for the navigation
system to be operational.
▷ Glass sunroof/panoramic glass sunroof: it
may only be possible to raise the roof. Have
the system initialized by the service center.
▷ Digital compass: recalibrate
▷ Active steering: the system automatically initializes
for a short time as you drive. During
this time, the system is deactivated.
▷ xDrive: the system automatically initializes
as you drive. During this time, indicator
lamps light up. If the lamps do not disappear
during the current trip, have the system
checked.
See also:
Programming
General information
1. Switch on the ignition.
2. Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the L ...
Switching the interior lamps on and off
Press the button.
To switch off permanently: press the button for
approx. 3 seconds.
To clear this setting: press the button. ...
Instrument lighting
You can adjust the brightness of the instrument lighting only when the parking
lamps or the low beams are switched on.
1. Push button 1in the turn signal/high beam lever up or down repeated ...