See also:

Programming
Programming 1. Memory buttons 2. LED Fixed-code hand-held transmitters 1. Switch on the ignition, refer to page 61. 2. Initial setup: Press both outer memory buttons 1 for approx. 20 seconds ...

Changing, maintaining, and storing the speed
The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired s ...

Range
After the reserve range is reached: ► A Check Control message is displayed briefly. ► The remaining range is shown on the onboard computer. ► When a dynamic driving style is ...